Clarion NX700 - Bluetooth Telephone Operations (Tel Mode); AUX Operations

44
NX700
English
Owner’s manual
● When in the AV mode
• Touch the [Map] key on the Source screen to
switch to the Navi mode.
• When the image interruption from the Navi
arises, the screen will be changed to the Navi
display. When the interruption is finished, the
screen will return to the previous AV display.
Note:
• Depending on the distance to the next guidance
point and the vehicle’s speed, the image
interruption may continue until the next route
guidance finishes.
● When in the Navi mode
• Touch the [ ] key on the Navigation Menu
screen to switch to the AV mode.
• Touch the key of the currently selected Source
mode on the Source screen to switch to the
relevant AV mode.
Note:
• For more information on the Navi mode, see the
User Manual.
Bluetooth Telephone
Operations (Tel mode)
When the connection with your Bluetooth cellular
phone is established, the following functions are
available on this unit:
• Listening to your telephone calls on the car
speakers.
• Answering to an incoming call.
• Making a call using the Phone Dialer screen.
• Making a call using the Phonebook data in the
selected cellular phone.
• Making a call using the Call Log data of the
dialed/received calls.
• Redialing
Note:
• You need to register your Bluetooth cellular phone
(Pairing) before use.
Telephone operations
You can select the Tel mode from either AV or
Navi mode.
● When in the AV mode
• Touch the [Tel] or [TEL] key on the Source
screen to enter the Tel mode.
● When in the Navi mode
• Touch the [ ] key on the Navigation Menu to
enter the Tel mode.
• Touch the [TEL] key on the Source screen to
enter the Tel mode.
Note:
• For the details, refer to the supplied Bluetooth
telephone operation manual.
AUX Operations
This function is available when a VTR, etc. is
connected to the AUX terminal.
Note:
• For your safety, this system has a safety function
which turns off the picture when the car is moving,
so only the audio can be heard. The picture can
only be watched when the car is stopped and the
parking brake is applied.
Selecting the AUX mode
1. Press the [SRC] button, and touch the [AUX]
key. The system will enter into the AUX mode.
Showing the AUX mode screen
The AUX mode screen is used to adjust settings
concerning the AUX mode.
1. Touch the screen.
The AUX mode screen is displayed.
If you do not touch the screen for 7 seconds,
the display will return to the video screen.
Switching to another AUX mode
1. Showing the AUX mode screen, touch the
[AUX] key.
The system will enter into another AUX mode.
Changing the audio input level
The input audio level of the AUX terminals can be
changed.
• The factory default setting is “High”.
1. Touch the screen to display the AUX mode
screen, then repeat touching the [Sense] key
to select the level.
High: 10 dB
Mid: 4 dB
Low: 0 dB
WARNING
• For your safety, the driver should not
watch the video or operate the controls
while driving. Please note that watching
and operating the video while driving are
prohibited by law in some countries.