Why does my Clarion NX500 power not turn on?
The Clarion Car Receiver might not turn on because the fuse is blown. Replace it with a fuse of the same amperage. If it blows again, consult your store of purchase. Another possible cause is incorrect wiring, in which case you should also consult your store of purchase.
What to do if Clarion Car Receiver USB device is not recognized?
If your Clarion Car Receiver doesn't recognize the USB device, it could be damaged. Try disconnecting and reconnecting the USB device. If it's still not recognized, try a different USB device. Also, ensure that the connectors are not loose.
How to fix Clarion NX500 when sound skips or is noisy?
If the sound skips or is noisy on your Clarion Car Receiver, the compact disc might be dirty. Clean it with a soft cloth. Alternatively, the compact disc could be heavily scratched or warped; if so, replace it with a compact disc that is not scratched.
What to do if Clarion Car Receiver disc cannot be loaded?
If your Clarion Car Receiver won't load a disc, it could be that another disc is already loaded. Eject the disc before loading the new one. Alternatively, there might be a foreign object in the loading mechanism, in which case you should forcibly eject the foreign matter.
Why is Clarion NX500 USB device cannot be inserted?
If you cannot insert the USB device into your Clarion Car Receiver, it might be because the USB device has been inserted in the wrong direction. Try reversing the connection direction of the USB device. If that doesn't work, the USB connector might be broken, and you should replace it with a new USB device.
What to do if Clarion NX500 Car Receiver sound skips or is noisy with MP3/WMA files?
If the sound skips or is noisy when playing MP3/WMA files on your Clarion Car Receiver, the MP3/WMA files may not be encoded properly. Try using MP3/WMA files that are encoded properly.
What to do if nothing happens when buttons are pressed on Clarion Car Receiver?
If nothing happens when you press the buttons on your Clarion Car Receiver and the display is not accurate, the microprocessor may have malfunctioned due to noise. Turn off the power and open the operation panel. Press the reset button with a thin rod. Note that when the Reset button is pressed, frequencies of radio stations, titles, etc. stored in memory are cleared.”
Why Clarion NX500 Car Receiver sound is bad directly after power is turned on?
If the sound quality of your Clarion Car Receiver is poor immediately after turning it on, water droplets may have formed on the internal lens when the car was parked in a humid place. Let it dry for about 1 hour with the power on.
What to do if Clarion NX500 image is not displayed?
If the image is not displayed on your Clarion Car Receiver, it may be because the parking brake is not engaged. Check that the parking brake is engaged.
Why does Clarion Car Receiver remote control unit not work?
The remote control unit for your Clarion Car Receiver might not work if direct sunlight is falling on its light-receptive part. Also, check the batteries of the remote control unit to ensure they are not dead or missing.
Diagram and explanation of the unit's physical controls.
Fundamental procedures for using the unit.
Guide to navigating and using the main menu options.
Instructions for connecting and operating iPod and iPhone devices.
Instructions for activating and viewing the external camera input.
Common issues and solutions for the unit.
General| Resolution | 800 x 480 pixels |
|---|---|
| Touchscreen | Yes |
| GPS Antenna | Included |
| AM/FM Tuner | Yes |
| iPod/iPhone Control | Yes, via USB |
| Rear Camera Input | Yes |
| Navigation | Built-in |
| Bluetooth | Yes, for hands-free calling and audio streaming |
| USB Port | Yes |
| AUX Input | Yes |
| CD/DVD Player | Yes |
| Steering Wheel Control Compatible | Yes |
| Video Output | Yes |
| Power Output | 4 x 50 Watts |
| Dimensions (W x H x D) | 178 mm × 100 mm |
| Audio Formats Supported | MP3, WMA, AAC |
| SD Card Slot | Yes |
To Next Page
