English
NX500/NZ500             23
English
Owner’s Manual
Radio Operations
Preset Scan
The Preset Scan receives the stations stored in 
the preset memory in order. This function is 
useful when searching for the desired station in 
memory.
1. Touch the [Band] key to select the desired 
  band. (FM or AM)
2. Touch the [PS] key to start the Preset Scan. 
  The unit starts scanning each station for 10 
  seconds sequentially.
3.  When the desired station is tuned in, touch  
  the [PS] key again to continue receiving that 
  station.
LOC/DX Setting
The DX / LOC setting changes the tuner 
sensitivity in order to seperate closely spaced 
stations. This feature is useful in areas that 
have many radio stations in close proximity.
1. Touch the [DX] key to switch to LOCAL 
  tuner sensitivity.
2. Touch the [LOC] key to switch to DX tuner 
  sensitivity.
DVD Video Player Operations
Change DVD System Settings
Note: 
 
If the set up operation is performed in 
  the middle of DVD video play, the disc 
  will restart from the beginning.
Selecting DVD Set Up Menu
1. Press the [SETUP] button on the Main Menu  
  to access the Video set up menu.
2. Press the [Video]. The video menu is 
  displayed.
Setting up the Screen Size
 
Press the [Aspect Ratio] button on the display 
in  to change the sceen size 4:3 or 16:9.
The factory default setting is “ 16:9 ”.
•  When watching a wide type through a 
  conventional type of the rear view monitor  
  (4:3), the leftmost and rightmost areas of the  
  screen are cut off.
  This function allows displaying the important 
  part of image fully on the screen. In some 
  cases, image is displayed while being panned 
  (scrolled).
•  When watching a wide type through a wide 
  type of the rear view monitor (16:9), 
  the leftmost and rightmost areas of the  
  screen are not cut off.
Setting up the Video System Format 
Press the Aux IN button on the display to set up 
the video system format : Auto, PAL or NTSC.
The default setting is Auto.
Touch the required system format on the 
screen. 
Setting up the Video Brightness
 
Press the brightness button. Touch the desired 
video brightness displayed, on scale from 0 to 
20.