Clarion NX500 - Route to home address

English
NX500/NZ500 33
English
Owner’s Manual
Route to home address
1. Touch the Home Address button on the
screen. If the home address is not set
previously, the following screen will be
displayed.
2.
Press the check key to display home address
set up screen.
3. Select one of the option on the screen to set
the address. Once the address is set, it will
be saved in the software memory.
4. If the home address was saved previously,
the screen with address will pop up, after
you touched the Home Address button.
Start your route
Select the destination
To select the destination press Go To... button
on Main Menu screen. The Go To... screen is
displayed.
To start your navigation use one of these
modes:
Address or Intersection
Point of Interest
Favorites
History
Adress or Intersection Mode
1. Press Address or Intersection, if you know
the street address. The spelling keyboard
will be dispayed.
2. Touch the first letter of desired city on the
keyboard. The city name will appear on the
screen.
3. Touch the select key. The list of the
cities, which name starts with same letter, will
be displayed. Press the desired city name.