Clarion NX700 - Current GPS Position and Lock-On-Road; Position Markers; Returning to Normal Navigation

22
Enabling Smart Zoom
Tap the map to let the map control buttons appear, and then tap to enable Smart Zoom.
Fine-tuning Smart Zoom
Tap the map to let the map control buttons appear, and then tap and hold to open the Smart Zoom
Settings window. Modify the zoom limits of Smart Zoom if necessary.
2.4.2 Position markers
2.4.2.1 Current GPS position and Lock-on-Road
When your GPS position is available, Clarion Mobile Map marks your current position with the icon
on the map.
The
icon may not show your exact GPS position and heading. If roads are near, it is aligned to the
nearest road to suppress GPS position errors, and the direction of the icon is aligned to the direction of
the road.
To use the current GPS position, tap
. The Position menu appears and you can save the GPS
position as one of the following:
x a Favorite
x a Road Safety Camera
x a POI
x a map marker Pin
2.4.2.2 Returning to normal navigation
When GPS position is available, and you have moved the map (the icon is moving or is not even
visible), or you have rotated the map in 3D mode, the
button appears. Tap it to move the map back
to the GPS position and re-enable Track-up map orientation (automatic map rotation).
Note!
Even if you move the map while you are driving, Clarion Mobile Map continues navigating
if there is an active route: it plays the voice instructions and displays the turn preview icons