38
NX405
English
English
Owner’s Manual
English
Owner’s Manual
And select a type of this device.
When the pairing operation completes, the registered
Bluetooth audio player is set as the current device,
after selecting the favorite icon, the display return to
the device list screen. Touch [
] button, the display
will return to the Bluetooth audio mode screen.
• To delete the Bluetooth audio player registration
1. Touch the [ ] button to delete the device.
A conrmation screen is displayed.
2. Touch the [ ] button to conrm delete.
Selecting the Bluetooth Audio Player
To change the current Bluetooth audio player to the
other device which is already registered, perform the
following operation.
1. Touch the device button to [ ] display the Device
Select screen.
2. Touch the currently connected device button, then
touch the [ ] button to disconnect the active
device.
3. Touch the desired Device button you wish to use.
Touch [ ] button to select it as your active
device. The corresponding cellular phone is set as
current telephone.
4. Touch the [ ] button to return to the previous
screen.
Controlling the Bluetooth Audio Player
Note:
• Occasionally, depending on the environment, playback
sounds may be fragmented, or switch noises may be
generated.
Playing Music
After the connection with a Bluetooth audio player is
established, the play mode is automatically engaged.
• When playback is not started for some devices,
touch the [ ] button manually.
Pausing Playback
1. Touch the [ ] button during playback.
Playback Pauses.
2. To resume playback, touch the [ ] button.
Playback resumes.
Skipping a Track Searching
3. Touch the [ ] or [ ] button during playback.
Stopping Playback
4. Touch the [ ] button during playback.
Tracks are stopped, touch the [
] button to
playback the rst Track.
Show Track List
5. Touch the [ ] button to show the current track
list.
Touch the [
] button to show all of the lists. And
you can playback any tracks by touch the items in
the list.
To Next Page
Loading...
Need help?
General
