Why does my Clarion NZ502E Car Receiver disc cannot play and shows “PARENTAL VIOLATION”?
If your Clarion Car Receiver displays “PARENTAL VIOLATION” and the disc cannot play, the feature exceeds the set parental level. Release the view limitation or change the parental level.
Why the audio quality is poor after connection with a Bluetooth enabled device to my Clarion NZ502E?
If the audio quality is poor after connecting a Bluetooth enabled device to your Clarion Car Receiver, the microphone might not be correctly positioned. Use an optional external microphone and adjust its position. The Bluetooth reception might also be poor. Move the device closer to the car audio system or remove any obstacle between the device and the system.
Why cannot pair the Bluetooth enable device with the Clarion NZ502E audio system?
If you cannot pair a Bluetooth enabled device with the Clarion Car Receiver car audio system, the device may not support the profiles required for the system, so use another device to connect. Also, the Bluetooth function of the device may not be enabled. Refer to the user manual of the device for how to enable the function.
Why does my Clarion NZ502E power not turn on?
The Clarion Car Receiver might not power on due to a blown fuse. Replace it with a fuse of the same amperage. If it blows again, there may be an incorrect wiring. In this case, it is better to consult your installation center.
What to do if nothing happens when buttons are pressed on my Clarion NZ502E?
If nothing happens when you press the buttons on your Clarion Car Receiver, it may be that the microprocessor has malfunctioned. Press the reset button with a thin rod to solve this. Note that when the reset button is pressed, the power turns off and frequencies of radio stations, titles, etc. stored in memory are cleared.
Why is my USB device not recognized by my Clarion NZ502E Car Receiver?
If your Clarion Car Receiver doesn't recognize the USB device, it might be damaged. Disconnect and reconnect the USB device. If it's still not recognized, try replacing it with a different USB device.
When the camera is connected, why is the image disturbed on my Clarion NZ502E Car Receiver?
If the image is disturbed when the camera is connected to your Clarion Car Receiver, the NTSC/PAL setting may be improper. Set the PAL/NTSC properly according to the camera.
Why does my Clarion Car Receiver USB device cannot be inserted?
If a USB device cannot be inserted into your Clarion Car Receiver, it might be because it has been inserted in the wrong direction. Reverse the connection direction and try again. If that doesn't work, the USB connector might be broken, so replace it with a new USB device.
What to do if my Clarion NZ502E display is dark?
If the display of your Clarion Car Receiver is dark, the brightness control might be too low. Adjust the brightness properly. Also, the operating condition might not be good, set to an appropriate temperature (25 or so) and check it again.
Why is the sound bad directly after power is turned on in my Clarion Car Receiver?
If the sound quality of your Clarion Car Receiver is poor immediately after turning it on, condensation may have formed on the internal lens. Let it dry for about 1 hour with the power on.
General| MP3 playback | Yes |
|---|---|
| USB direct playback | - |
| AM band range | 531 - 1602 kHz |
| FM band range | 87.5 - 108 MHz |
| Aspect ratio | 16:9 |
| Display diagonal | 7 \ |
| Product color | Black |
| Disc types supported | DVD, DVD+R, DVD+RW, DVD-R, DVD-RW |
| Bluetooth | No |
Weight and Dimensions| Dimensions (WxDxH) | 178 x 50 x 195 mm |
|---|
Provides essential safety measures for operating the device, including volume and driver distraction.
Advises on proper care and precautions for the device's operation panel to prevent damage.
Offers guidance and warnings regarding the use and limitations of the USB port for data transfer.
Details the correct methods for cleaning the unit's cabinet and liquid crystal panel.
Provides instructions and warnings for handling various types of discs to ensure optimal playback.
Explains the functions of the NAVI/AV button for navigation and the Eject button for disc removal.
Details the use of the internal microphone and the hardware reset button for system maintenance.
Identifies the AUX 1 input and covers the functions of playback control buttons (e.g., play/pause, next/previous).
Provides a comprehensive guide to the functions of various buttons on the remote control unit.
Explains the operation of playback, mute, power, and source selection buttons on the remote.
Details remote buttons for selecting input sources, bands, and navigating menus or settings.
Covers remote buttons for specific functions like ZOOM, AUDIO, SUB-T, ANGLE, and OPEN.
Covers changing system settings, screen size, parental control passwords, and rating levels.
Guides on connecting USB memory and selecting the USB Audio mode for playback.
Details playback controls, file selection, folder browsing, and playback features for USB audio files.
Guides on connecting USB memory and activating the USB Video mode for playback.
Details playback controls, file selection, and repeat functions for video files stored on USB.
Explains the operations within the USB Video menu for controlling playback and file management.
Details how to select and control playback using the iPod Audio mode and its interface.
Explains how to use playback controls, random mode, and other settings for iPod/iPhone interaction.
Covers controls for iPod audio and video playback, including ID3 information and simple control mode.
Guides on displaying iPod/iPhone video content, including settings and simple control mode operations.
Guides on connecting a Bluetooth audio player and selecting the appropriate mode for music playback.
Details the process of registering Bluetooth audio players and controlling their playback functions.
Covers selecting registered Bluetooth devices and managing music playback operations.
Guides on configuring Bluetooth telephone settings, pass keys, and selecting the telephone mode.
Details the process of pairing cellular phones and managing registered devices for telephone use.
Explains how to make and receive calls, use the keypad, and manage call interruptions.
Guides on making calls using the phone book and call history data stored on the unit.
Explains how to answer and end incoming calls using the system's interface.
Details the Traffic Announcement (TA) and Program Type (PTY) functions for enhanced radio reception.
Addresses common issues like power failure, button response, display accuracy, and remote control problems.
Covers problems related to disc loading, sound skips, video display, and parental violation errors.
Addresses issues with USB device insertion, recognition, sound, and video playback.
Covers problems with Bluetooth pairing, audio quality, and connection issues.
Guides on installing the main unit using a universal mounting bracket, including console opening dimensions.
Illustrates the comprehensive wire connections for various components like GPS, audio, video, and iPod/iPhone.
Emphasizes safe operation of the navigation system, driver focus, and proper placement of the device.
Guides users through the initial setup process, including language, license agreement, and voice guidance settings.
To Next Page
