Clarion NZ502E - Managing TA and PTY Settings; Emergency Broadcast and TA Volume

42 NZ502E
English
English
Owner’s Manual
English
Owner’s Manual
AF (Alternative Frequency) function
TheAFfunctionswitchestoadifferentfrequency
on the same network in order to maintain optimum
reception.
SwitchingON/OFFtheAFfunction
1. Touch the [
] key.
2. Touch the [
] or [ ]keyoftheAFitemto
turn the function on or off.
• WhentheAFfunctionisON,“AF”willbedisplayed
at the top of the screen.
• Ifthereceptionofthecurrentbroadcaststation
deterioratesdurably,“AF”indicationwillblink,and
this unit searches for the same program on another
frequency.
REG (Regional Program) function
WhentheREGfunctionisON,theoptimumregional
station can be received. When this function is OFF, if
the regional station area is switched as you drive, a
regional station for that region is received.
Note:
•Thisfunctionisdisabledwhenanationalstationsuch
as BBC R2 is being received.
•TheREGfunctionON/OFFsettingisenabledonlywhen
theAFfunctionisON.
SwitchingON/OFFtheREGfunction
1. Touch the [
] key.
2. Touch the [
] or [ ]keyoftheREGitemto
turn the function on or off.
TA (Traffic Announcement) function
Whenatrafcannouncementbroadcaststartsduring
theTAstandbymode,thetrafcannouncement
broadcast is received as top priority regardless of
thefunctionmode,soyoucanlistentoit.TheTrafc
Program(TP)automatictuningisalsoavailable.
SettingTAstandbymode
1. Touch the [
] key.
2. Touch the [
]keyoftheTAitemtosettheTA
standby mode.“TA” will be displayed at the top of
the screen, and the system will automatically search
foraTPstation(TPSEEK).WhenanRDSbroadcast
stationwithtrafcannouncementprogramis
received, “TP” will be displayed at the top of the
screen.
Note:
•IfnoTPstationisreceived,thissystemcontinuesthe
search operation. Performing the above procedure
again makes the “TA” go off, and stops TP station
searching.
CancelingaTrafcAnnouncementbroadcast
Touch the [Cancel]keywhileaTrafcAnnouncement
broadcastisbeingreceived.TheTrafcAnnouncement
broadcast reception is canceled, and the system goes
intotheTAstandbymode.
CancelingTAstandbymode
1. When “TA” is displayed on the screen, touch the
[
] key.
2. Touch the [
]keyoftheTAitem.
“TA”onthescreengoesoff,andtheTAstandbymode
is canceled.
PTY (Program Type) function
This function enables you to listen to a broadcast of
thespeciedprogramtypewhenthebroadcaststarts,
even if the system operates in a mode other than the
Tuner mode.
• SomecountriesdonotyethavePTYbroadcast.
•IntheTAstandbymode,aTrafcAnnouncement
broadcaststationhaspriorityoveraPTYbroadcast
station.
SelectingPTY
1. Touch the [
] key.
2. Touch the [
]keyofthePTYitemtoenterthe
PTYstandbymode.
3. Touch the [
]key(programtypedisplay)to
displaythePTYSelectscreen.
4.TouchyourdesiredPTYPresetkeytoselectthe
program type.
5. Touch the [
] key to return to the previous
screen.
CancelingPTYstandbymode
1. Touch the [
] key.
2. Touch the [
]keyofthePTYitem.
“PTY”goesoff,andthePTYstandbymodeis
canceled.
PTYseek
1. Touch the [
] key.
2. Touch the [
]key(programtypedisplay)to
displaythePTYSelectscreen.
3.TouchyourdesiredPTYPresetkeytoselectthe
program type.
4.TouchaSeekkey,thesystemseeksaPTY
broadcastmovingupthefrequencies.
• The29typesofPTYlistedbelowcanbeselected.