Clarion NZ502E - 4. NZ502 E Button Functions; NAVI;AV and Eject Button Operations; Microphone and Reset Button Functions; AUX 1 Connector and Playback Control Buttons

8 NZ502E
English
English
Owner’s Manual
English
Owner’s Manual
NZ502E Functions of Buttons
Note: Be sure to read this chapter while referring to front
diagram “PANEL CONTROLS”.
[NAVI/AV]Button
• Pressthisbuttontoenternavigationmode;press
again to return current source.
• Pressandholdthisbuttonfor3secondstodisplay
the brightness setting panel.
• Press this key to change display of sub LCD when
panel is closed.
[
]EjectButton
• Presstoejectdiscfromunit.
[Microphone]]
• InternalmicrophoneforuseduringBluetoothphone
calls.SensitivitycanbeadjustedfromtheSettings
menu.
[RESET]Button
• Pressthisbuttontohardwareresettheunit.
Note: When the [RESET] button is pressed, frequencies
of radio stations, titles, etc. stored in memory are
cleared.
[AUX1 JACK ]
AUX1Connector.
[
] Button
Press to search next station or channel in Tuner mode.
• Press to search next track or chapter in CD, MP3/
WMA, USB,iPod and DVD video modes.
• Press over 1second to fast forward in CD, MP3 /
WMA,USB and DVD video mode, press over 1second
again to change the speed to 2x, 4x, 8x or 16x.
• Press and hold to fast forward in iPod mode.
• Press and hold to enter manual seek status in Tuner
mode, then press briefly to seek station by step.
[
]Button
• PresstosearchpreviousstationorchannelinTuner
mode.
•PresstosearchprevioustrackorchapterinCD,
MP3/WMA,USBiPodandDVDvideomodes.
•PresstoplayfrombeginningofcurrenttrackinDVD
Audio,CD,USBVideo,USBAudio,iPodAudio,iPod
Videomode.(Inplayfor2seconds)
[OPEN]
[TA/SEND]
[
/ ]
[-]
[+]
[IR]
[
]
[
]
[
]
[BND/END PS]
[NAVI/AV]
[Microphone]
[RESET]
[AUX IN]
[MENU/PWR]
[microSD]
2