Clarion NZ502E - Selecting the Bluetooth Audio Player; Controlling the Bluetooth Audio Player

35NZ502E
English
English
Owner’s Manual
English
Owner’s Manual
4. Touch your desired Device and press the [ ]
keytoregisterfortheBluetoothaudioplayer.
5.IfenteringthePassKeycodeispromptedonyour
Bluetoothaudioplayer,enterthePassKeycodeset
to this unit.
• YoucanchangethePasskeysettingofthisunit
fromtheBTInfoscreen.
• Youalsocanaddthefavoriteicontotheconnected
device. There are 10 favorite icons for selection.
When the pairing operation completes, the
registeredBluetoothaudioplayerissetasthe
current device, after selecting the favorite icon, the
displayreturntothedevicelistscreen.Press[
]
button,thedisplaywillreturntotheBluetoothaudio
mode screen.
•TodeletetheBluetoothaudioplayerregistration
1. Touch the [
]keytodeletethedevice.
Aconrmationscreenisdisplayed.
2. Touch the [
]keytoconrmdelete.
Selecting the Bluetooth audio player
TochangethecurrentBluetoothaudioplayertothe
other device which is already registered, perform the
following operation.
1. Touch the Device key to [
] display the Device
Selectscreen.
2. Touch the currently connected device, then press
the [
] key to disconnect the active device.
3. Touch the desired Device key you wish to use.
Press[
] key to select it as your active device.
The corresponding cellular phone is set as current
telephone.
• Ifthepowerofthecellularphoneisnotturnedon,
turn it on.
• Thecellularphonemayprompttoacknowledgethe
BluetoothconnectionorasktoenterthePassKey
code of this unit.
Performtheseoperationsaccordingtothemessage
displayed.
4. Touch the [
] key to return to the previous
screen.
Controlling the Bluetooth audio player
Note:
•Occasionally,dependingontheenvironment,playback
sounds may be fragmented, or switch noises may be
generated.
Playing a music
AftertheconnectionwithaBluetoothaudioplayeris
established, the play mode is automatically engaged.
• Whenplaybackisnotstartedforsomedevices,
touch the [
] key manually.
Pausing playback
1. Touch the [ ] key during playback.
Playbackpauses.
2. To resume playback, touch the [
]key.Playback
resumes.
Skipping a track (searching)
3.Pressthe[ ] or [ ] button during playback.
Tracks are skipped, as many as the times the button is
pressed, and playback starts.
Stopping playback
4.Pressthe[ ] button during playback.
Tracks are stopped, press the [
] button to
playbacktherstTrack.