Clarion VX404AU - Tuner Operations; Listening to the Tuner; RDS Function Setting

39
VX404AU
English
English
Owner’s Manual
English
Owner’s Manual
15. TUNER OPERATIONS
The tuner in this head unit contains RDS
(Radio Data System) in FM band.
Listening to the Tuner
1. Press the [Tuner] button on the Main menu to
display the tuner mode.
2. Press the [FM1/FM2/FM3/AM] button to select
theband.Eachtimethebuttonispressed,the
radio reception band changes in the following order:
FM1->FM2->FM3->AM -> FM1...
1. Option Button
2. Preset Scan Button
3. Seek Down
4. Seek Up
5. Frequencies Scroll Display
6. System Time
7. REG,PTY,AF,TA,TP Status
8. Bluetooth Status
9. Preset List
10. Frequencies and Channels Display
11. DX/Local Display
12. Band Button
13. PS and PTY Name
14. Shortcut Button
15. Radio Text Display
Seek Tuning
1. Press the [FM1/FM2/FM3/AM] button to select the
radio band (FM or AM).
2. Press the [ ] or [ ] button
• When Press the [ ] button, the station is searched
in the direction of higher frequency.
• When Press the [ ] button, the station is searched
in the direction of lower frequency.
Step Tuning
1. Press the [FM1/FM2/FM3/AM] button to select the
radio band (FM or AM).
2. Press the [ ] or [ ] button in frequency menu to
tune up or down the step by step.
Recalling a Preset Station
1. Press the [FM1/FM2/FM3/AM] button to select the
desired band (FM or AM) on the tuner.
2. Press the preset station (1 to 6) on Preset List.
Manual Memory
1. Press the desired band key to select the band you
wish to store.
2. Tune to a station you want to store using the seek
tuning, step tuning, or preset tuning.
3. Press and hold the desired preset button you want
to store for about 2 seconds.
RDS Function Setting
Press the Option [ ] to set the RDS operation.
note:
The RDS operation does not work during AM radio
reception.
1. TA (Traffic Announcement) Function
Whenatrafcannouncementbroadcaststartsduring
theTAstandbymode,thetrafcannouncement
broadcast is received as higher priority regardless of
thecurrentfunctionmode,soyoucanlistentoit.The
TrafcProgram(TP)automatictuningisalsoavailable.
Setting TA Standby Mode
TurnTAswitchtoON,TAstandbymodeissetand
“TA” will be displayed at the top of the screen.
WhenanRDSbroadcaststationwithtrafc
announcementprogramisreceived,“TP”willbe
displayed at the top of the screen.
Note: If no TP station is received this system continues
the search operation. Performing the above procedure
againmakesthe“TA”turnstooff,andstopsTP
station searching.
Canceling a Traffic Announcement
Broadcast
Press the [Cancel]buttonwhileaTrafc
Announcement broadcast is being received. The
TrafcAnnouncementbroadcastreceptionis
canceled,andthesystemgoesintotheTAstandby
mode.
Canceling TA Standby Mode
When“TA”isdisplayedonthescreen,turnTAswitch
toOFF,“TA”onthescreengoesoff,andtheTA
standby mode is canceled.
Volume Setting of TA
The volume of TA can be set during TA interruption.
2. AF (Alternative Frequency) Function
The AF function switches to a different frequency
on the same network in order to maintain optimum
reception.
15
6
11
9
10
5
2
4
8
13
12
14
7
1
3