Clark GCS 30 - Seat belts

General Safety Rules
Surface and capacity
Avoid or slow
down on these
conditions ...
o°o
o?;^
°4; GRAVEL
&&•*•
O-O
they can
cause a truck
to tip over.
Know the weight of your truck and load.
Check capacities:
LJ Elevators
LJ Floors
Planned Maintenance and Lubrication
Truck Lubrication
Raise the rear of the truck and place
blocking under the frame for safety.
Lubricate the steer axle linkage — tie
rod ends and kingpin bearings. Be sure
to clean the grease fittings before
lubricating and remove the excess
grease from all points after lubrication.
Inspect the steering cylinder piston
rod, seals and fasteners for damage,
leaks and looseness.
Remove the blocking and lower the rear
of the truck.
Lubricate the tilt cylinder rod ends (at
the forward end) and the upright trun-
nion bushings.
83M480
84M274
Your CLARK Dealer
keeps all lubricant
available for you
2.2