GEX/GTX Operator Compartment 4-11
Section 4. Operator Compartment and Controls
Down arrow button (Mode button)
:
Pressing this button
in normal operating condition, it will move to Menu mode.
Up arrow button (Enter button)
:
Pressing this button, it
will move to upper menu.
Left arrow button (Slow speed button): In normal
operating condition, it will select/release Slow speed.
When pressing, the following figure will be displayed and Slow
speed selected.
Pre
ss once more to release.
The
figure will be disappeared and Slow speed released.
Chan
g of slow speed
Use "+/-" buttons to change the set speed while the Slow speed is
selected. After adjusting the speed, press "Enter" (Up arrow) button to
store it.
The speed can be set from 2 km/h to 9km/h with unit of 1km/h.
Right arrow button (Power selection button): In
normal operating condition, it will select/release Power.
Power mode is composed of 3 steps, and it can be adjusted by
use of "+/-" buttons. After adjusting the speed, press "Enter" (Up
arrow) button to store it.
Power mode
In the order of Economy → Normal → Power; Pressing "+" button to
move right, and "-" left.
•
Economy: It is Slow speed mode to save the battery consumption
as minimizing the acceleration function.
• Normal: It is normal operating mode, and smooth acceleration can
be done.
•
Power: Powerful acceleration is possible and the work ability will be
improved.
Plus(+) button: Increase the data as set value in the
current Menu mode.
Minus(-) button: Decrease the data as set value in the
current Menu mode.
To Next Page
Loading...
