Clark GEX 40 - Page 113

GEX 40-50 9-3
Section 9. Specifications
Battery, fully charged : 1.275 specific gravity (1.310 Exide Load Hog)
Discharged : 1.140 specific gravity
Fill Capacities—Fluid Volumes
Drive Axle : each 1.4L ~ 1.6 L
Hydraulic Sump Tank (Useable Volume) :
- GEX 40~50 : MFH ~5000 : 22 L
MFH 5001~ : 30 L
Hydraulic Fluid Recommendation
Normal application - CLARK Specification MS-68 Hydraulic oil
(CLARK # 1802155).
Drive Axle Fluid Recommendation : MOBIL Fluid #424 (CLARK #
1809371).
Power Steering Fluid Recommendation : Uses main hydraulic
sump oil supply.
Brake Reservoir
Normal application - CLARK Specification SAE J 1703 DOT 3
(CLARK # 1803831).
Multi-Purpose Grease
Use genuine CLARK parts. See your CLARK dealer.
Axle Ends, Wheel Bearings : NLGI Grade No. 1 Lithium soap base grease
CLARK Specification MS-9B and MS-107B
Steering linkage, upright
mast & carriage rollers, trun-
nion bushings, tilt cylinder
rod ends, brake pedal shaft :
NLGI Grade No. 2 Lithium soap base grease,
CLARK Specification MS-107C.