To Next PageTo Next Page
Need help?Do you have a question about the Clarke Burnisher and is the answer not in the manual?
General| Model | Burnisher |
|---|---|
| Pad Size | 20 in |
| Motor | 1.5 hp DC rectified |
| Pad Speed | 2000 rpm |
| Power Source | Electric |
| Weight | 89 lb |
| Application | Floor polishing and burnishing |
Discusses risks of CO exposure and guidelines.
Outlines permissible exposure limits for CO.
Explains the toxic effects of carbon monoxide on the body.
Discusses ventilation and air currents for CO dilution.
Compares burnishing and stripping for CO risk.
Emphasizes using CO monitors for safe operation.
Crucial warning about using CO monitors for safe operation.
Differentiates monitoring needs for home vs. occupational settings.
Factors determining safe operation time based on room size.
Explains the meaning of DANGER, WARNING, and CAUTION terms.
Covers risks associated with manual, moving parts, and adjustments.
Highlights dangers of propane, CO emissions, and noise.
Stresses the importance of safety goggles, clothing, and hearing protection.
Describes the two basic types: buffer/burnisher and floor stripper.
Emphasizes essential maintenance for machine longevity.
Warns about the dangers and consequences of overfilling propane tanks.
Covers propane properties, tank construction, and safety codes.
Details the steps for purging new LP-Gas cylinders.
Discusses safe refilling, storage, and the dangers of overfilling.
Outlines pre-operation checks and visual inspections.
Step-by-step guide for starting the machine's engine.
Procedures for safely shutting down the machine.
Explains crankcase and exhaust emission control systems.
Covers fuel system, pad replacement, and belt replacement.
Advises on frequency and type of engine oil for maintenance.
Addresses issues with engine idle characteristics and adjustments.
Lists potential causes for machine vibration and solutions.
Diagnoses issues related to fuel supply when throttle is advanced.
Lists parts for the 21", 24", 27" frame assembly.
Details parts for the wheel bracket assembly.
Lists components for the wheel and axle assembly.
Lists parts for throttle control mechanisms.
Details components for handle grips and tubes.
Lists parts for electric clutches and switches.
Lists parts for the engine bonnet and protective cage.
Details components for the fuel and oil systems.
Lists parts for emission control and exhaust systems.
Lists parts for the engine bonnet and fuel system adaptor.
Details components for the fuel and oil systems.
Lists parts for ignition and fuel filtration.
Lists electrical switches and fuel hoses.
Details components for fuel control and regulation.
Lists battery, cables, and wiring harness components.
Lists tanks, fittings, and associated hardware.
Details components for fuel control and connection.
Lists regulator assembly and hose clamp parts.
Lists various shaft types for different machine models.
Details bearing and snap ring components for assemblies.
Lists pulleys for machines with or without clutches.
Lists parts for the steel pad driver assembly.
Details parts for the flex pad driver assembly.
Lists different sized pad gripper rings for various machines.
Chart mapping belt sizes to machine configurations.
Lists pulleys used on the engine shaft and their applications.
Details pulleys for the front-end shaft and their uses.
Illustrates different clutch types and their associated pulleys.
Identifies key electrical components in the 12V DC system.
Provides a guide for testing the key switch positions.
Identifies electrical parts in the 12V DC system.
Details the procedure for testing the key switch.
Outlines electrical parts and the Envirogard system.
Covers key switch and optional equipment connections.
Identifies electrical parts and the 12V DC fuel system.
Details key switch and hourmeter connections.
Outlines electrical parts and the Envirogard module.
Covers optional equipment and various switch connections.
Identifies electrical parts and ignition system components.
Details key switch operation and accessory connections.
Lists production, service, and sales locations in the USA.
Lists production, service, and sales locations in Europe and abroad.
Details the 2-year warranty for parts and labor, including exceptions.
Covers specific warranty periods for battery and emission systems.
Outlines warranty exclusions, disclaimers, and steps for service.
