Clarke ultra speed - User Manual

Electronic Service
Manuals
This electronic document is provided as a service to our customers.
We do not create the contents of the information contained in this docu-
ment. Should you have detailed questions pertaining to the information
contained in this document, you may contact Michco, or the manufac-
turer which provided the original information in this electronic deliver-
able. Michco’s only part in this electronic deliverable was the electronic
assembly process. By providing this manual on line we are not guaran-
teeing parts availability.
You may contact Michco through the following methods:
Phone (517) 484-9312 or (800) 331-3339
2011 N. High St. -- Lansing, Michigan -- 48906
Fax: (517) 484-9836
Email: CustServe@Michco.com
Web site: www.Michco.Com
Parts Web site: www.FloorMachineParts.Com
Order Parts on Line at:
www.FloorMachineParts.Com
Directly to Parts & Service:
By Email: Shop@Michco.com
By Fax: (517) 702-2041
By Voice: Use numbers above.
Serving the Cleaning Industry Since 1922
Notice: All copyrighted material remains property of original owners, all trademarks are property of respective owners.
Manuals are subject to Manufacturer’s reproduction limitations. Originals or reproductions were provided by manufacturers
through a request. We make no warranty as to the correctness of information provided in this document and you assume
all risk. By placing these manuals on line we are not declaring our corporation to be an manufacturer authorized dealer or
provider, please check our web site for authorized manufacturers we represent.

Summary

Operator Safety Instructions

General Safety Warnings

Covers DANGER, WARNING, and CAUTION statements to prevent injury and damage.

Flammable Materials and Ventilation

Precautions for operating near flammables and the need for proper ventilation.

Electrical Safety Precautions

Guidelines for preventing electric shock, including proper grounding and cord handling.

120 Volt Machines

240 Volt Machines

Electrical Connection Instructions

Guidance on connecting 240V machines to power supply and electrical ground.

Extension Cord Usage Guidelines

Selecting and using extension cords with 240V machines safely.

How to Prepare the Machine for Operation

Installing the Burnishing Pads

Adjusting Pad Pressure

How to Operate the Machine

Starting and Stopping Procedures

Procedure for safely starting and stopping the burnisher, including safety precautions.

Circuit Breaker Explanation

How to Put the Machine in Storage

Machine Inspection and Repairs

How to Correct Problems in the Machine

Troubleshooting Common Issues

Solutions for machine problems like no power, indicator lights, and excessive vibration.

Maintenance

Motor Maintenance and Cleaning

Brush Wear Indicator Light

Commutator and Carbon Brush Inspection

Electrical Schematic

Machine Wiring Diagram

Clarke ultra speed Specifications

General

Brush Motor	1.5 HP
Pad Size	20 inches
Speed	175 RPM
Voltage	120 V
Power Cable	50 ft