Clarke Hunter 54 User Manual

1
OPERATION & MAINTENANCE
INSTRUCTIONS
©
HUNTER 54
AIR COMPRESSOR
0311
HUNTER 54
AIR COMPRESSOR

Clarke Hunter 54 Specifications

General

Brand	Clarke
Model	Hunter 54
Category	Air Compressor
Language	English

Summary

SAFETY PRECAUTIONS

WARNING SYMBOLS

Read Instruction Booklet

General advice to read the manual before operation or adjustment.

Risk of Electric Shock

Warning about electric shock, disconnection, and damp environments.

Risk of Accidental Start-up

Warning about automatic start-up after power interruption or reset.

Hot Surfaces Warning

Caution about high-temperature surfaces during operation.

Bursting Hazard

Warning that water can burst when the drain plug is removed.

Wear Protective Gear

Advice to wear safety goggles and ear protectors.

High Sound Level

Warning about high sound levels and the need for ear protection.

ELECTRICAL CONNECTIONS

Wiring Colour Code

Explains the colour coding of wires for connection to terminals.

Plug and Fuse Replacement

Guidance on handling moulded plugs, fuse covers, and replacements.

Fuse Rating

Specifies the required fuse rating and approval for replacements.

RCD Recommendation

Strong recommendation to connect via a Residual Current Device (RCD).

PARTS IDENTIFICATION

Component Diagram

Visual identification of compressor parts with numbered labels.

ASSEMBLY

Installation and Lifting

Instructions on careful lifting and checking for transit damage.

Fitting Transportation Wheels

Steps for attaching the wheels using bolts and washers.

Positioning the Air Compressor

Guidance on placing the compressor on a stable surface with adequate ventilation.

PREPARING FOR USE

Check Oil Level

Procedure to check and top up the oil reservoir using the dipstick.

Pre-Connection Checks

Verifying mains voltage, switch position, and pressure regulator setting.

Initial Run and Oil Distribution

Running the compressor briefly to distribute oil before use.

Connecting Air Tools

Instructions on connecting air hoses and tools safely.

OPERATING INSTRUCTIONS

Switching the Air Compressor ON

Steps to start the compressor, including lifting the switch.

Safety Valve Check

Daily procedure to check the safety valve's operation.

Adjusting Output Pressure

How to use the pressure regulator to set the desired output pressure.

Switching the Air Compressor OFF

Procedure to safely turn off the compressor and disconnect power.

Removing Tools Safely

Steps for safely detaching air tools and releasing hose pressure.

Thermal Overload Reset

How to reset the motor if the thermal overload protection activates.

Draining the Reservoir

Procedure for draining condensate from the air reservoir after each use.

ROUTINE MAINTENANCE

Daily Checks

Daily tasks include checking oil level and draining the tank.

Monthly Air Filter Cleaning

Instructions for inspecting and cleaning the air intake filter monthly.

Six-Monthly Checks

Includes tightening bolts and cleaning external parts.

Oil Replacement Schedule

When to replace the compressor oil based on hours of use or time.

Non-Return Valve Maintenance

Inspecting and replacing the non-return valve and gasket.

TROUBLE SHOOTING

SPECIFICATIONS

Technical Details

Lists electrical supply, pressure, motor rating, dimensions, and part number.

PARTS DIAGRAM

Exploded View

Detailed diagram showing all parts of the compressor with reference numbers.

PARTS LIST

SPARE PARTS AND SERVICE

Contact Information

Provides phone numbers and email addresses for parts and service inquiries.

DECLARATION OF CONFORMITY

Product Compliance

Declares compliance with EU directives and applied standards.

Noise Emissions Data

States measured and guaranteed sound power levels for noise compliance.