EasyManua.ls Logo

Clarke HUNTER - User Manual

Clarke HUNTER
15 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
OPERATION & MAINTENANCE
INSTRUCTIONS
©
HUNTER
AIR COMPRESSOR
0407
HUNTER
AIR COMPRESSOR

Table of Contents

Questions and Answers

  • Y
    ylewisJul 26, 2025
    What to do if my Clarke Air Compressor stops and will not start again?
    • O
      Olivia MedinaJul 26, 2025
      If your Clarke Air Compressor stops and won't restart, the issue might stem from bad electrical connections, a tripped overload cutout switch, or burnt-out motor windings. First, check and tighten all electrical connections. If that doesn't work, switch the compressor off, wait for 5 minutes, and then switch it back on. If the problem persists, you may need a replacement motor; contact your local Clarke dealer.
  • K
    Karen AshleyAug 11, 2025
    Why does my Clarke HUNTER not reach the set pressure and overheats easily?
    • K
      Kelsey DelgadoAug 11, 2025
      If your Clarke Air Compressor isn't reaching the set pressure and is overheating, the compressor head gasket might be blown, or a valve could be broken. Allow the compressor to cool down, then disassemble the head and replace any broken components. Before reassembling, carefully clean all sealing surfaces. If you're unsure, contact your Clarke dealer.

Summary

Specifications

Guarantee

Safety Precautions

Assembly

Electrical Connections

Operation

Routine Maintenance

Daily Maintenance

Perform daily checks like draining condensate and verifying bolt tightness before operation.

Monthly Maintenance

Conduct monthly checks including air filter inspection and oil level verification.

Trouble Shooting

Parts List

Parts Identification

Accessories

Spare Parts and Service

Paint Spraying Hints

General Preparation

Ensure the spray area is clean, connect the gun correctly, and prepare the surface to be painted.

Paint Preparation

Achieve correct paint viscosity and mix thoroughly in a separate container before filling the spray gun.

Handling the Gun

Spray Gun Maintenance

Clarke HUNTER Specifications

General IconGeneral
ModelHUNTER
Power SourceElectric
Horsepower2 HP
Power1.5kW
Voltage230V
Phase1
Pump TypeSingle

Related product manuals