13
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
CARE & MAINTANENCE
This battery charger requires minimal maintenance. As with any appliance or
tool, a few common sense rules will prolong its working life.
1. Wind up the leads when not in use. Examine the leads at regular intervals
for damage and have them replaced if necessary.
2. Clean the case and leads if necessary with a moist cloth and clean any
corrosion from the clamps with a solution of water and baking soda.
SPECIFICATIONS
WARNING: ALWAYS BE SURE THE CHARGER IS UNPLUGGED BEFORE
PERFORMING ANY MAINTENANCE OR CLEANING. ANY REPAIRS MUST BE
DONE BY A QUALIFIED SERVICE TECHNICIAN.
Model Number IBC20
Input voltage/current 230V, 50Hz, 2.5A
Battery charging voltages: 12V & 24V
Power 350W Max
Output current 12VDC - 2A/4A/6A/8A/10A/15A
24VDC - 3.5A/7.5A
Efficiency 85% approx
IP Rating IP20
Battery Capacity 2-400 Ah (12V), 14-200 Ah (24V)
Charging steps 8 steps (smart charger)
Current back drain <5mA
Operating Temperature Range -10 to 40°C
Dimensions (D x W x H) 155 x 237 x 236 mm
Weight 1.76 kg
Charging lead length (red& black) 1.2 M
Mains power cable length 1.7 M
To Next Page
Loading...
