5
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
OVERVIEW
The IBC20 is designed for charging all types of 12V and 24V lead-acid batteries
including WET (flooded), GEL, MF (Maintenance Free), EFB (Enhanced flooded
battery), and AGM (Absorbed Glass Mat) batteries.
The in-built microprocessor provides fast and safe charging using its safety
features to protect against sparking, reversed polarity, short circuit,
overcurrent, overcharge and over heating.
The auto-memory feature means that after powering on, the visual display will
show the last selected mode (except BOOST mode).
1 Power LED (green) 8 Charging Current LEDs (12V
white/24V blue)
2 Error LED (Wrong Connection) - red 9 Power On/Off Button
3 Charging LED (yellow) 10 Boost Selector
4 Charged LED (green) 11 Charging Current Selector
5 Boost LED (red) 12 Voltage Selector
6 NEGATIVE (BLACK) lead 13 POSITIVE (RED) lead
7 Digital Display
To Next Page
Loading...
