10
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
storage position, then disconnect the Positive clamp from the battery
terminal, and restore to its storage position.
8. After use, always recharge the jump-start. If the battery is allowed to
remain in a discharged state, its life may be shortened.
9. Regularly check the charge level of the battery by pressing the TEST push-
button on the front panel.
USING AS A 12VOLT POWER SUPPLY
The jumpstart has two cigar lighter type sockets located on the front (see
page 6), that allows connection via a standard DC connector to other DC
electrical equipment/appliance.
WARNING: Be aware that a fully charged 12V battery can have an output of
approx.13.5V. Consult the appliance handbook to ensure it is safe to operate
from a 12V battery.
The table below indicates the approx. operating time from a fully charged
battery.
THE USB CONNECTION
The jumpstart has a USB socket located on the front (see page 6), that allows
connection via a standard USB connecting lead to small appliances such as
phones/MP3 players.
ESTIMATED OPERATING PERIOD PROVIDED
WARNING: IT IS POSSIBLE THAT SOME ELECTRONIC EQUIPMENT COULD BE
DAMAGED BY JUMP STARTING. ALWAYS CHECK WITH THE CAR
MANUFACTURER’S HANDBOOK TO DETERMINE WHAT PRECAUTIONS IF
ANY SHOULD BE TAKEN.
Estimated Use Electrical Appliance
30 hours Mobile phones
21 hours Radios, fans
12 hours Cam-corder, VCR, Spotlight
7 hours Electrical tools, bilge pump
To Next Page
Loading...
Need help?
General
