27
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
SPECIFICATIONS
CLARKE International reserve the right to change specifications at any time
without prior notice
.
DUTY CYCLE
The duty cycle determines the machine ‘down time’. i.e 10% means 1 minutes
operation followed by 9 minutes of rest. The duty cycle must be adhered to
prevent the thermal cutout protection from activating
.
Do not exceed the stated duty cycle for this machine. Failure to heed this
warning may invalidate your warranty.
Model MIG 196
Part No 6015600
Weight 30.6 kg
Dimensions (l x w x h) mm 500 X 275 X 390
Power Supply 230 V @ 50Hz
IP Rating IP21S
Output Min/Max Amps 40 /180 Amps
Open Circuit Voltage 21 - 38 V DC
Rated Max Input Current (A) 37
Welding Capacity (Mild Steel) 5-6 mm
MIG196
Duty Cycle (%) 10 60 100
Rated Welding Current (A) 180 74 60
Conventional Load Voltage (V) 23 18 17
To Next Page
