EasyManuals Logo

Clarke PG2500A User Manual

Clarke PG2500A
24 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #7 background imageLoading...
Page #7 background image
7
Parts & Service: 020 8988 7400 / E-mail: Parts@clarkeinternational.com or Service@clarkeinternational.com
UNPACKING AND ASSEMBLY
Unpack your generator and check to ensure the following items are present.
Should there be any deficiency or damage caused during transit contact
your CLARKE dealer immediately.
BEFORE USING THE GENERATOR
Attach a suitable earth lead to a good earthing point - water pipe, ground
spike etc., whenever you use this generator.
Before using your generator check that:
The generator is in good condition and free from any damage.
The generator is clean and free from fuel or oil spillage.
The generator is correctly located for use (See page 3).
The fuel system is intact and there is no leakage.
NOTE: Always use a funnel to fill the fuel tank to avoid accidental
spillage of fuel. If fuel is spilled it must be cleaned up before use.
The generator Spark plug box spanner
Tommy bar 12 Volt D.C. output lead assembly
WARNING: ENSURE THERE IS ADEQUATE FUEL IN THE TANK WHEN USING
THE GENERATOR. RUNNING OUT OF FUEL OR STOPPING THE ENGINE
SUDDENLY WITH A LOAD CONNECTED COULD CAUSE SERIOUS DAMAGE.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clarke PG2500A and is the answer not in the manual?

Clarke PG2500A Specifications

General IconGeneral
BrandClarke
ModelPG2500A
CategoryPortable Generator
LanguageEnglish

Related product manuals