Specifications
Model No. ..................................................................................... CBS12WV
Part No. .......................................................................................... 6460030
Motor ............................................................................................. 230V 50Hz 1Ph
Power Rating ................................................................................. 550 Watts
Motor Speed ................................................................................. 1430rpm max.
Blade Speed .................................................................................
200-600
M/Min under Load
Max. Depth of Cut ........................................................................ 85mm (3
5
/
16
”)
Max. Throat Width ......................................................................... 305mm (12”)
Table Tilt ......................................................................................... 0-45 Degrees
Table Size ...................................................................................... 345 x 345mm
Dust Port ......................................................................................... 41.5mm
Weight ............................................................................................ 15.5kg
Noise Level .................................................................................... 90dB LWA*
*(Sound Power Level) Cutting 25mm soft wood at maximum speed
Restrictions of Use
This saw is NOT suitable for cutting:
•
Timber greater than 110mm in depth.
•
Metal, stone, rubber, plastic, bones, etc.
•
Logs or round timber.
3
Spare Parts & Service Contacts
For Spare Parts and Service, please contact your nearest dealer,
or CLARKE International, on one of the following numbers.
PARTS & SERVICE TEL: 020 8988 7400
PARTS & SERVICE FAX: 020 8558 3622
or e-mail as follows:
PARTS: Parts@clarkeinternational.com
SERVICE: Service@clarkeinternational.com
To Next Page
Loading...
Need help?
General
