Why does my Clarke XE10/100 Air Compressor start and stop frequently?
If your Clarke Air Compressor starts and stops more frequently than usual, drain off condensation from the air receiver at least once a week. Locate any leaks in the control unit or inspection cover using soapy water and repair them.
What to do if Clarke XE10/100 runs continuously but can’t attain the working pressure required?
If your Clarke Air Compressor runs continuously but doesn't reach the required working pressure, several factors could be responsible. The suction filter might be blocked, so try changing it. For machines that are not direct drive, the V-belt might be too slack and need tightening. There could also be a leak between the compressor block and air receiver, or leaks in or near the air receiver; tighten the connection and repair any leaks. Ensure unobstructed airflow around the unit.
General| Brand | Clarke |
|---|---|
| Model | XE10/100 |
| Category | Air Compressor |
| Language | English |
To Next Page
