E N G L I S H
1
2
4
3
Klick!
2
Mounting & Installation
Mounting of the cover
1. Make sure the hinge tting (2) is completely folded backwards.
2. Fit the cover (1) on the
hinge tting (2) but not
all the way down.
3. First set the cover’s left pin (3) in
the record player’s left xing (4)
and then push the cover’s right pin
(5) carefully in the record player’s
right xing (6).
4. At the same time press
down the cover on the
hinge tting (2) until it is
locked and a click sound
is heard.
Note:
Carefully attach the cover on
the record player’s side x-
ing. Incorrect mounting can
damage the record player’s
side xing.
6
5