E N G L I S H
Find a section in a track
1. Press and hold I◄◄ or ►►I to search a segment/chapter in a track. The CD
is now being played with high speed and low volume.
2. Release the button when you hear the section you are seeking. The normal
playing resumes.
Play a CD containing MP3 or WMA les
1. Open the CD compartment by pressing [OPEN/CLOSE] (11).
2. Place a CD (Audio or CD-R/CD-RW containing MP3 les) with the text up in the
CD compartment.
3. Close the CD compartment by pressing [OPEN/CLOSE] (11).
4. Set the function switch (15) in position
CD/USB/SD.
5. After a little while the total amount of tracks are shown in the display.
6. Press once or multiple times on [FOLDER] (4) to choose the [FOLDER] you
want to play. The [FOLDER] name is shown on the display.
7. Use
I◄◄ and ►►I to select a desired track in the chosen [FOLDER].
8. Press [PLAY/PAUSE/STOP] (2) to start playing.
9. Press [PLAY/PAUSE/STOP] (2) to temporarily stop the playing. Current track
number blinks in the display. Press [PLAY/PAUSE/STOP] (2) to continue playing.
10. Press and hold [PLAY/PAUSE/STOP] (2) to stop the playing.
Remarks
• The sound quality on MP3 les can vary depending on the CD or the quality of
the recording.
• The time for the device to load an MP3 disc is usally longer than for a regular CD.
Display titles (via the remote control)
• During playing of MP3 les, press once on the [INFO] button on the remote to
show or hide the ID3 information of the current track.
• If no information is available for the track the text “NONE” or “UNKNOWN” is
shown on the display.
Search track after title (via the remote)
You can search for a track giving its title/name.
1. At stopped playing press the button [FIND] once on the remote.
2. Use
I◄◄ and ►►I to browse among the tracks in alphabetical order.
3. Press [PLAY/PAUSE/STOP] (2) to start playing.
To Next Page
Loading...
Need help?
General
