Need help?Do you have a question about the Classe Audio CA-5200 and is the answer not in the manual?
Information regarding CE, FCC, RoHS, and WEEE standards applicable to the amplifier.
Initial guidance for installing the Classé amplifier and its impact on system performance.
Guidance on optimal placement for performance and ensuring adequate ventilation.
Covers custom installations, serial number, registration, operating voltage, and warm-up.
Guide to configuring balanced or single-ended input operation for each channel.
Setting turn-on delay, amplifier number, and making preamp/speaker connections.
Explanation of the standby button functionality and LED status indicators.
Details on Select, Channel Status LEDs, and Mode buttons.
Describes Balanced (XLR), Single-Ended (RCA) inputs, speaker outputs, and control ports.
Information on the AC mains input connection and internal fuse.
Requirements for Delta series products, cables, terminators, and interface boxes.
Using the interface, shared/model-specific features, and information screens.
Addresses no sound, blinking LEDs, amplifier shutdown, and blown fuses.
General| Type | Solid State |
|---|---|
| Channels | 5 |
| Gain | 29 dB |
| Power Output | 200W per channel at 8 ohms |
| Frequency Response | 20 Hz - 20 kHz (+0, -0.1 dB) |
| Input Impedance | 50 kOhms (RCA) |
| Signal to Noise Ratio | 110 dB |
| Input Sensitivity | 1.4V (for full output) |
| Dimensions | 445 x 184 x 495 mm |
| Weight | 34 kg |
To Next Page