Classeq Under Counter Range - User Manual
Warning!
If the warewasher is being drained immediately after use, the water
draining from the Boiler Drainage Hose may be as hot as 95°C.
14. Loosen the Jubilee Clip and remove the Drain Plug, ensuring the water flows into
the container. Once fully drained replace the Drain Plug and retighten the Jubilee
Clip.
15. Replace the Front Panel, and ensure all cables and hoses are secured to the
warewasher to prevent tripping hazards. The warewasher is now ready to be
removed.
RECYCLING: If you are recycling or disposing of your warewasher, you
must ensure this is done in accordance with local and national
regulations.
To Next Page
Loading...
