5.5 Integral Water Softener (if fitted)
5.5.1 Commissioning the water softener unit
To commission the Water Softener unit follow the instructions below:
1. Open the door to the warewasher.
2. Remove the right hand Basket Guide.
3. Remove the Salt Reservoir Cap at the back right hand corner of the Wash Chamber.
4. Fill the Reservoir with fresh water.
5. Using the Water Softener Funnel supplied, fill the Reservoir with approximately
1.5kg of granulated salt.
6. Wipe away any excess or spilt salt from the Wash Chamber and the Reservoir
opening.
7. Refit the Salt Reservoir Cap, ensuring that the Cap is fitted flat and secure.
8. Do not overtighten the Salt Reservoir Cap.
To Next Page
Loading...
