Turning the dishwasher on
Loading the dishwasher
Push the ‘ON’ button, the button will flash amber to indicate
pre-heating and water filling of the machine. You can continue
to prepare the machine whilst this process occurs.
Open the door to load the items. Before loading, ensure debris
is rinsed from the items. Once complete, close the door.
See the User Manual for loading information.
2
1
Selecting a wash program (optional)
If you do not require the default
program then choose your
desired program using the
SELECT button until the display
shows the program you require.
4
Confirming your selection
Cycle indicator will illuminate blue to show a program selection
has been made.
5
Dishwasher starts cycle
Once the temperature and water cycle is complete, the amber
START button will illuminate green and your program will start.
3
D400 D400DUO D400DUOWS D500 D500DUO D500DUOWS
G350 G400 G400DUO G400DUOWS G500 G500DUO G500DUOWS
Undercounter Dishwasher/Glasswasher
Quick User Guide
2 Mins
*
3 Mins
1.5 Mins
2 Mins
5 Mins
*
*
Default program
Caution
Only use this Quick User Guide after the
Dishwasher has been fully commissioned.
See Section 5 in the User Manual.
To Next Page
Need help?
General
