EasyManua.ls Logo

ClassicFlame 36EB110-GRT - Listings and Code Approvals; Warning; Installation Overview

ClassicFlame 36EB110-GRT
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Electric Builder Box
E-1
CONSUMER SAFETY INFORMATION
PLEASE READ THIS MANUAL BEFORE USING THIS APPLIANCE
WARNING
Thank you and congratulations on your purchase of a Classic Flame electric
builder box. Please read the installation instructions before installing and
operating this appliance.
IMPORTANT: Read all instructions and warnings carefully before using.
Failure to follow these instructions may result in a possible electric shock,
fire hazard and/ or injury and will void the warranty.
IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED,
AN ELECTRIC SHOCK OR FIRE MAY RESULT CAUSING PROPERTY
DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
DO NOT STORE OR USE GASOLINE OR OTHER FLAMMABLE
VAPORS AND LIQUIDS IN THE VICINITY OF THIS
OR ANY OTHER APPLIANCE.
ELECTRIC BUILDERS BOX
MODEL NUMBERS:
INSTALLATION GUIDE
36EB110-GRT, 36EB111-GRC
36EB220-GRT, 36EB221-GRC
Twin-Star International, Inc.
Delray Beach, FL 33445
U.S.A.
Made in China
Printed in China
©2012,Twin-Star International,Inc.
For Customer Service:
www.twinstarhome.com
866-661-1218
8:30 a.m. - 5:30 p.m., EST, Monday-Friday
LISTINGS AND CODE APPROVALS
THE BUILDERS BOX SERIES HAS BEEN TESTED AND APPROVED IN ACCORDANCE WITH
CSA AND UL STANDARDS FOR FIXED AND LOCATION DEDICATED ELECTRIC ROOM HEATERS.
MODEL SPECIFICATIONS
WARNING
INSTALLATION OVERVIEW
(Please read all instructions and user manual before installation)
THE INSTALLATION OF THE BUILDER BOX MUST COMPLY WITH THE APPLICABLE
LOCAL AND / OR NATIONAL ELECTRICAL CODES AND UTILITY REQUIREMENTS.
THIS INSTALLATION SHOULD BE ENTRUSTED TO ONLY QUALIFIED
PERSONNNEL WHERE REQUIRED BY LAW.
Section 1.) Prepare product for installation.
Section 2.) Rough in framing following the recommended dimensions.
Section 3.) Recommended power supply wire specifications.
Section 4.) Mount the unit.
Section 5.) 120V wiring instructions.
Section 6.) 208/240V wiring instructions.
Section 7.) Install control box.
Section 8.) Check & test.
Section 9.) Electrical wiring diagram.
E-2
36EB110-GRT
36EB220-GRT
36” TRADITIONAL
36” CONTEMPORARY36EB111-GRC
36EB221-GRC
MODEL NUMBER DESCRIPTION
120
120
208/240
208/240
RATED POWER
WATTS
1440
1440
2100/2800
2100/2800
12
12
10.1/11.7
10.1/11.7
BTU
AMPS
VOLTAGE
36” TRADITIONAL
36” CONTEMPORARY
4400
6700/8900
4400
6700/8900

Related product manuals