Clavitech TB5200 - Song Recording Track Management; Selecting Recording Tracks

D. Hold down [USB FILE] button, then press [RECORD] button Recording.to start When the
recording is finished, the recorded file will be saved as a new file named 002SONG_001 .
E. Use the same operation as Step¡D¡to record more tracks. The name of the new file will
be saved in sequence.
Select Tracks by Yourself
A. Insert the USB Stick into the USB Terminal
B. Press the [RECORD] button to start recording.
(The first measure is for tempo count-in only and it cannot record any data, so remains blank).
C. Press [RECORD] button again to stop recording.
Recording stops and your performance is written to the song . The song to
wdata
performance is recorded is automatically named xxxSONG_ xxx ( xxx indicates t
h
song file number. SONG_xxx is the song's name).
D. Press [FUNCTION] button, use [+] or [-] button to select 17 then pre
s¡ M.RecTr£¡,
[ENTER] button, use [+] or [-] button to select Tracks (01-16).
NOTE
If you want to record new files based on the pre-recorded multi-
track file, the new recording will begin with the first track. All
the tracks of the pre-recorded multi-track file will follow the
newly-recorded tracks in sequence.
Quick Recording automatically makes track assignments as below:
Track 1--------- Main Voice
Track 2--------- Split Voice
Track 3--------- Dual Voice
8va
8va
ACC
PHR2PHR1
PAD
CHORD2CHORD1
BASS
RHY2RHY1
augsus4
13
5
9
11
7
m
M
6
dim
ACC
O.T.S
METRONOME
PORTABLE GRAND
DSP
SUSTAIN
TOUCH
TRANSPOSE
TEMPO
MEASURE
CHORD
HARMONY
DUAL
SPLIT
VOICE
DEMO
STYLE
REVERB
CHORUS
MIDI IN MIDI OUT FREEZE
TWIN
REVERBSAVE MEM
USB FILE
RECORD
PLAY/LOAD
MULTI
DELETE
43
U DISK
DUAL
NORMAL