4 Claytech C3X / C5X User Manual
5 Contents
1. Quick installation guide ................................................................................... 2
2. Introduction ........................................................................................................ 3
3. Key Features ....................................................................................................... 3
4. ISO 7010 Symbols used in this manual .......................................................... 3
5 Contents ............................................................................................................... 4
6. Standards and Approvals .................................................................................. 4
7. Warnings ............................................................................................................ 5
8. Technical Specifications .............................................................................. 7 - 8
10. Assembly ........................................................................................................... 7
11. Installation ................................................................................................. 9 - 10
12. Operation .........................................................................................................10
13. Maintenance and Cleaning ............................................................................11
14. Trouble Shooting .............................................................................................12
15. Warranties – Terms and Conditions .............................................................13
6. Standards and Approvals
The RCM is a symbol that represents compliance with two
independent schemes:
EESS; and ACMA’s labelling requirements
For electrical safety, in-scope electrical equipment must not be
sold unless the item is marked with the RCM in compliance with
AS/NZS 4417.1 & 2 and the EESS.
Pumps that carry the AS/NZ4020 Drinking Water Approval
demonstrate compliance with requirements of Australia & New
Zealand Standards of products that come into contact with water
intended for human consumption. This approval also ensures that
the water coming from the pump will not be contaminated by
toxic materials or metals. It also means the water will not support
the growth of micro-organisms and will not cause a change in
taste or appearance.
CE marking is a certification mark that indicates conformity with
health, safety and environment. The CE marketing represents a
manufacturer’s declaration that products comply with the EU’s
New Approach Directives. These directives not only apply to
products within the EU but also for products that are
manufactured in or designed to be sold in the EEA.
To Next Page
Loading...