Claytech C3X / C5X User Manual 9
11. Installation con’t
GENERAL INSTALLATION NOTES
Install the pump as
close to the water source as practical and where it is easily
accessible
Use plumbing fittings that make removal of pump for servicing possible.
Fitting inlet and outlet isolation valves will aid pump servicing or removal but also allows
for fault diagnosis.
Protect the pump from weather, flooding or insect infestation.
If the region is frost-prone, protect the pump against freezing.
The pump unit is an electrical apparatus and therefore must
be protected against moisture. Environmental temperature
should not exceed 40ºC
Never run the pump before filling with water.
Running dry will damage the pump and void warranty.
To Next Page