Page 5 Athena
®
Reset Foamer
2. Product Overview
Product requirements
Compressed air requirements 50 psi with 5-10 SCFM (141-283 l/min)
Liquid temperature range 40-100˚F (4.4-37˚C)
Chemical compatibility
Chemical products used with this equipment must be formulated for
this type of application and compatible with unit materials and pump
seals. For more information on chemical compatibility, consult the
manufacturer or SDS for your product or contact our customer service
department.
Power type Compressed air
Chemical pickup type Draws from concentrated product
Dilution ratio 1 oz (29.57 ml) of each chemical per 1 gallon (3.8 liters) of water
Number of products unit can draw from Two products, simultaneously
Capacity
15 gallons (56.8 liters) of water
5 gallons (18.9 liters) of Athena® PERAFOAM
5 gallons (18.9 liters) of Athena® RESET
Discharge line length/diameter 50 ft. (15.2 m) hose, with 3/4 in. (19 mm) inside diameter
Discharge wand/tip type 10 in. (3.9 cm) stainless steel wand with 80 degree fan tip and ball valve
Pump seals Kalrez
Wheel type
Two 10 in. (25.4 cm) non-marking wheels
Two 5 in. (12.7 cm) casters—one with lock
Product specifications
To Next Page
Loading...
Need help?
General