8. How to Pair the Device
Place the robot, recharging base and sonic wall
together in auto-recharging mode then activate
the power.
Beep once: Recharging base paired.
A Long Beep: Sonic wall paired.
No Beeps: Paired or Pairing fail.
After device paired, it won't enter pairing mode
again and will exit pairing mode in 15 sec.
* The robot already pair with the recharging base which can be used immediately.
* If there is a replacement/maintenance/new-adding of the robot and accessories,
it will need to pair up again.
* Robot can pair up to two recharging bases and three sonic walls. Only purchase
the accessories from the authorized dealer.
7. Pairing Settings
20
C L E A N M A T E
To Next Page
Loading...
