16
Product Maintenance
Cleaning Side Brush
1. Check if side brush is broken or something is stuck
2. Clean the side brush
3. If side brush is curly or deform, put them in hot water for 5 seconds
4. If side brush is worn out then please change
Cleaning Dust Bin and Filters
Empty and clean dust bin every time when you use it, cleaning steps as
below:
A. Wash the primary filter after every cleaning session, at least every 15-30 days to maximize
its use life.
B. Before installing the p
rimary filter make sure it is dry.
C. HEPA filter should be replaced if it has lost its shape or no longer fit tight against the filter
frame.
D. Recommended changing intervalls for the HEPA filter:
i. Once per month if the robot is vacuuming seven days a week
ii. Every other month if it is used 3-4 days per week
iii. Every four months if used less than once per week.
To Next Page
Loading...
