CLEAN AND MAINTENANCE
1.Rinse the dust bin with tap water.
2.Periodically clean the filter with a soft bristle brush.
3.
Reinstall the filter and the dust bin lid once they have dried.
4.Put back the dust bin into the cleaner.
NOTE:
Before putting back the dust bin, please make sure the transparent film (functions as non-return
valv
e) in the dust bin is well placed. Recheck the filter also before operate the product. If
operate the product without filter, it might cause malfunction.
(6)
(7)
(8)
(9)
CLEAN AND MAINTENANCE
Cleaning intake
After repeated use for some time, dirt and dust might accumulate around the intake of the product,
to ensure its best cleaning efficiency and constant airflow it should be cleaned periodically.
1.Remove the external power source.
2.Clean up the dirt and dust at the intake.
(10)
10
6.
7.
8.
9.
Do not rinse the dust lter with water.
14
To Next Page
Loading...
