EasyManua.ls Logo

Clearblue Easy - Page 25

Clearblue Easy
37 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
23
What conditions or medication could
interfere with my test result?
Always read the manufacturers instructions for any medication you are taking before using the
Clearblue® Easy Fertility Monitor. Most medications (e.g. simple pain killers and cold remedies)
should not affect the way the Clearblue® Easy Fertility Monitor works. However, certain medical
conditions and medications can adversely affect the performance of the Clearblue® Easy
Fertility Monitor. Refer to pages 5 and 6 ‘Limitations on Use,’ for further information. If in any
doubt, please speak to your doctor.
Q5 A
Please Note: Some medications are
contra-indicated in pregnancy.
Therefore, we recommend that you
consult your doctor if you are taking any
medication, before you try to conceive.
What should I do if I pressed the
m Button by mistake?
Don’t worry, you can cancel it. If you set the m Button on the wrong day, you must cancel it. To
cancel, press the m Button for 5 seconds until the m Symbol disappears. When the m Button is
released, the Display Screen will return to its original state.
Q6 A
What if I am unable, or forget to set
the m Button on day 1 of my cycle?
If you are on day 2, 3, 4 or before your chosen m Button setting time on day 5 of your cycle,
simply hold the m Button down at your chosen m Button setting time, and release it when the
correct day number is shown on the display. The Monitor will then work correctly.You can also
do this to set a different Testing Window during days 2 to 5 of your cycle, if the Testing Window
set on day 1 is inconvenient.
If you are not able to set the m Button during the first 5 days of your cycle, you should wait until
your next cycle starts to set the m Button.
Q7
A
The m Button setting time is important.
Please refer to pages 11 and 12.
If my period starts during the day and
I have to wait until the next morning
before setting the m Button should I
set it as day 1 or day 2?
You should set it as day 1. You must always set the m Button the morning after your period
begins.The Clearblue® Easy Fertility Monitor understands this as day 1.
Q8 A
b09401_CB_FAM_Booklet.qxd 8/20/08 11:18 AM Page 25