Clearblue Easy - Page 26

24
Your Questions Answered
Can I use more Test Sticks if I want to? No, tests can only be performed when requested by the Monitor.
Q9
A
How do I know if I’ve inserted the
test correctly?
If you have inserted a Test Stick correctly a flashing Test Stick Symbol will indicate
that the Test Stick is being read. Do not remove the Test Stick until requested to do so.
Q10
A
My Monitor did not display a Peak
Fertility Symbol this cycle.
What does this mean?
There may be a small percentage of cycles in which you do not see Peak Fertility Status. There
are a number of possible reasons for this, for example, a test may have been missed or
performed incorrectly or you may not have ovulated this cycle. An unusually short or long cycle
may result in Peak Fertility not being detected. If Peak Fertility is not detected, the Monitor may
show High Fertility for an extended period of time.This may be as long as 19 days. If this occurs,
it is unlikely that you will be fertile during this entire time.
If you do not see Peak Fertility over a number of cycles, speak to your doctor.
Q11
A
My Monitor displayed Low Fertility
during all of my last cycle.What does
this mean?
This cycle the Monitor did not detect a change in the hormones that control your fertility. You may
not have ovulated during this cycle or it may be due to a missed test, or a test being performed
incorrectly. If your fertility status stays Low over a number of cycles consult your doctor.
Q12
A
My Monitor changed straight from
Low to Peak Fertility this cycle. What
does this mean?
This may happen occasionally, for example when a rise in estrogen is detected on the same day
as your LH surge or if the Monitor does not detect a change in your estrogen before your LH
surge.This can happen if you miss a test, or perform a test incorrectly, or if you have a very short
cycle following longer cycles.You should still have intercourse during this Peak Fertility time.
Q13 A
b09401_CB_FAM_Booklet.qxd 8/20/08 11:18 AM Page 26