Clearfield YOURx - Flatdrop

Direct: 763.476.6866 • National: 800.422.2537 • www.SeeCleareld.com • techsupport@clfd.net
28
YOURx Multi-Purpose Terminal
Installation Manual
_________________________________________________________
Manual 021023 REV A - Jan 2020
1.
2.
4. Inspect and clean the connector, then make a direct connection to the
assigned port.
Note: You can NOT store FieldShield slack in this terminal.
FLATdrop
DO NOT assemble the connector until the ber is through the FlexPort
and inside the terminal.
Push the terminated ber end through the assigned FlexPort.
3. If using a factory installed FlexConnector, push the FlexConnector into
the FlexPort rmly until it is fully seated.