Clearlight HALOONE - Pausing A Session

Pausing A Session
• The session stops automatically when the water tank is empty.
• You can also press and hold the POWER button for 2 seconds to
pause your session.
4
When the unit is empty:
• Remove the saline capsule holder and remove the empty capsule if
still in the unit.
• Place one saline solution capsule into the holder.
• Insert the capsule holder back into the device.
• The empty tank indicator will turn off.
If the unit’s internal saline solution level is low or empty, the session will
not start:
• The status indicator will blink blue.
• The empty tank indicator will turn on.
3
10