Cleco 48EAE15AL3 - Page 11

Page 11
TM12-1105-LG1
08/25/2017
EN
Maintenance
Implement a comprehensive safety maintenance program
to provide regular inspection for all phases of tool operation
and air supply equipment.
Daily:
→Visualinspectionofallcablesandconnections
→Visualinspectionofallexternaltoolcomponents
→Checkthetoolforexcessivevibrationorunusualnoises
Approximately 100,000 Rundowns:
→Inspectthetoolcablefordamageorwear
→Inspectthetoolcableconnectionforasecuret
→Inspecttheoutputspindlefordamageorwear
→Verifythemaximumfreespeed
Approximately 500,000 Rundowns:
→Disassemblethetoolandinspectallpartsfordamageor
wear and replace as necessary
→Cleanandlubricatetheanglehead,gearing,andmotor
bearings
→Ifequipped;recalibratethetransducer
Approximately 1,000,000 Rundowns:
→Disassemblethetoolandinspectallpartsfordamageor
wear and replace as necessary
→Cleanandlubricatetheanglehead,gearing,andmotor
bearings
→Ifequipped;recalibratethetransducer
Lubricants
Application of the assembly tool determines how frequently
it is greased. All gearing should receive a generous amount
of grease during each service interval.
Part No.
Packaged Grease
540395 2 oz. (0.06 kg) Magnalube-G
513156
16 oz. (0.45 kg) Magnalube-G
541444
2 oz. (0.06 kg) Rheolube 363AX-1
541445
16 oz. (0.45 kg) Rheolube 363AX-1