EasyManua.ls Logo

Clek FLLO - Installing Rear-Facing With LATCH

Clek FLLO
50 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
34
35
WARNING — DEATH or
SERIOUS INJURY can occur (continued)
• Never leave this car seat unsecured in your vehicle. This car seat must
remain secured even when not in use. In a sharp turn, crash or sudden
stop, an unsecured car seat can be thrown around and could severely
injure vehicle occupants.
• When installing this child restraint Rear-Facing, it must be secured by the
LATCH belt or vehicle seat belt as shown in this instruction manual.
Installing Rear-Facing Car Seat With LATCH
WARNING — DEATH or
SERIOUS INJURY can occur
• Only use the car seat LATCH system in vehicle seating locations
designated by the vehicle manufacturer for use with LATCH and that have
a standard anchor spacing of 11in (280 mm).
• LATCH Push-on Connectors must be secured to the vehicle LATCH lower
anchors only. Connection to other vehicle anchors or vehicle components
could result in the anchor tearing free in a crash.
• Never attach more than one push-on connector to a vehicle lower anchor
unless recommended by the vehicle owner’s manual for that vehicle.
• LATCH belt must be routed through Rear-
Facing Belt Path.
• Do NOT install by this method for a child
weighing over 35 lb (15.9 kg).
LATCH

Table of Contents

Other manuals for Clek FLLO

Related product manuals