Clemco Zero User Manual

BNP PRESSURE BLAST CONVERSION KIT Page 2
Figure 1
Figure 2
Welding, grinding, or drilling on the blast
machine could weaken the vessel. Compressed
air pressure could cause a weakened vessel to
rupture, resulting in death or serious injury.
Welding, grinding, or drilling on the blast
machine vessel, without a National Board R
stamp voids the ASME and National Board
certification.
1.5.2 All welding repairs done on the vessel must be
performed by certified welders, at shops holding a
National Board R Stamp. Welding performed by any
welder not properly qualified per the ASME Code voids
ASME and National Board certification of the vessel.
1.5.3 This vessel is rated for a maximum of 125 psi
(pounds per square inch); do not exceed the rated
pressure.
Adjustable
Vortex
RP Dust
Collector
WARNING
Flex Hose
(not supplied with kit)
Dry Filter
Must mach capacity of reclaimer
Exhaust Hose
To exhaust muffler
Blast Machine
Air Filter
Compressed air inlet
From cabinet
hoppe
r
Debris Screen
Flex Hose
Reclaimer
Exhauster
Optional Adjustable Vortex
Blast Hose
Blow-off Hose

Clemco Zero Specifications

General

Brand	Clemco
Model	Zero
Category	Industrial Equipment
Language	English