CLEVERSPA 10001 - Before You Set Up Your CleverSpa

06
BEFORE YOU SET UP YOUR CLEVERSPA
®
1. You must have solid support foundation where
you install your CleverSpa
®
. When setting up,
ensure there are no sharp objects that could
damage the CleverSpa
®
and the location is level
so the CleverSpa
®
sits properly.
2. During filling, emptying or when in use, water
may spill out. You should install it near to a
drainage point that is able to accept the total
volume of water.
3. Do not leave the surface of the CleverSpa
®
exposed to direct sunlight for long periods
of time as this may affect the strength of
the welds.
Before setting up outdoors
1. Floor must be able to withstand
weight of the CleverSpa
®
+ occupants.
2. Floor should be a non-slip, level surface.
3. Suitable drainage is essential when
installing your CleverSpa
®
indoor.
Carefully consider the placement
of your hot tub before installation.
Before setting up indoors
CLEVERSPA ETL US IM_FINAL.indd 6CLEVERSPA ETL US IM_FINAL.indd 6 07/01/2020 16:1707/01/2020 16:17