CLEVERSPA 10001 - Page 8

You can also see our Clever Clips on how to setup your CleverSpa
®
just visit clevercompany.com
08
Add water to level, no
higher than ‘Max’ level.
22
Screw Filter Cartridge (B)
on to Filter Connectors (N1 & N2).
B
20
J
D
J
Screw cap back
onto Air Outlet (J).
Unscrew Hose (D)
from Air Outlet (J).
Water Outlet (M)
Drainage Plug (G).
Filter Connectors
(N1 & N2) Drainage Plug (G).
M
N2
N1
G
18
19
16 17
Add the Filter Protector
Cover (C)
onto the
Filter Cartridges (B)
.
C
21
Remove Hose (D) from
Inflation Valve (K).
D
K
K
Screw cap back onto
Inflation Valve (K).
15
14
Once inflated, press the
‘Inflate/Air Jet’ on control panel
to ‘Stop’ inflation.
13
Set temperature on control panel*.
Clip on Top Cover (E) to retain the heat.
*See page 10 for full operating instructions.
Double lock clips with
Safety Locking Keys (H).
23
24
SETTING UP YOUR CLEVERSPA
®
CLEVERSPA ETL US IM_FINAL.indd 8CLEVERSPA ETL US IM_FINAL.indd 8 07/01/2020 16:1707/01/2020 16:17