Clevo Mustang W650 - Wireless LAN Module

Modules
Wireless LAN Module 7 - 17
7
Wireless LAN Module
If you have included an Intel ® Advanced N Wi-Fi Link 6200, Intel ® Ultimate N
Wi-Fi Link 6300
module or 3rd Party 802.11b/g/n WLAN module in your pur-
chase option, make sure that the Wireless LAN module is on b
efore installing the
driver.
Use the Fn + F11 key combination or Touch Sensor Instant Key to toggle power
to the Wireless LAN module.
When the WLAN module is powered on, the touch sen-
sor LED will be
highlighted and the indicator will briefly be displayed.
Make sure you install the drivers in the order indicated in
Table 4 - 1, on page 4 - 3 .
The operating system is the default setting for Wireless LAN control in Windows 7.
Wireless should be turned ON in the Windows Mobility Center to ensure proper
wireless function key behavior (see “Wireless Hot Keys” on page 7 - 34).

Wireless Device
Operation Aboard
Aircraft
The use of any portable
electronic transmission de-
vices aboard aircraft is usu-
ally prohibited. Make sure
the module(s) are OFF if
you are using the computer
aboard aircraft.
Use the Fn + F11 key com-
bination/Touch Sensor In-
stant key to toggle power to
the WLAN module, and
check the LED to see if the
module is powered on or
not (see Table 1 - 4, on
page 1 - 10/ Table 1 - 3, on
page 1 - 8).
Mustang W650 Notebook