Clevo NJ70CU - HDD Assembly Removal (contd.)

Disassembly
Removing the Hard Disk Drive 2 - 7
2.Disassembly
5. Remove screws from the HDD assembly (Figure 3d).
6. Slightly lift and pull the hard disk assembly in the direction of arrow
(Figure 3e).
7. Lift the hard disk assembly out of the bay (Figure 3f).
8. Remove screws - and bracket from the hard disk (Figure 3g).
9. Reverse the process to install a new hard disk (do not forget to replace the screws).
8
9
10
11
11
12
13
14
d.
8
e.
f.
13
14
15
9
12
10
10
11
g.

HDD System Warning
New HDD’s are blank. Before you begin make
sure:
You have backed up any data you want to
keep from your old HDD.
You have all the CD-ROMs and FDDs re-
quired to install your operating system and
programs.
If you have access to the internet, download
the latest application and hardware driver up-
dates for the operating system you plan to in-
stall. Copy these to a removable medium.

9. HDD Assembly
14. Bracket
15. HDD
•3 Screws
Figure 3
HDD Assembly
Removal (cont’d.)
d. Remove the screws.
e. Slightly lift and pull the
HDD in the direction of
the arrow.
f. Lift the HDD assembly
out of the bay.
g. Remove the screws and
bracket from the HDD.